Sterile Services and Instrument Decontamination training for your team
Licence this one module for the staff who need it. No CareStream subscription, no minimum order, no annual contract. One licence covers one member of staff for the complete Sterile Services and Instrument Decontamination module, in the language they think in.
- Teach, then assessA full lesson with a real care scenario, followed by an assessment that checks they can apply it.
- Over 60 languagesStaff read the lesson and answer in their first language. Your records stay in English.
- Wrong answers get followed upA short micro-lesson goes back to the staff member on the exact point they missed, then they retry.
- Evidence you can hand overA dated completion record and a certificate per person, ready for your CQC file.
Sterile Services and Instrument Decontamination, start to finish.
This training ensures you understand how surgical instruments are safely cleaned, disinfected and sterilised so they cannot transmit infection between patients. You will learn the decontamination cycle, the dirty to clean workflow, equipment operation, tracking requirements and the critical safety checks that protect every surgical patient in our hospital. This is the same module CareStream subscribers get, written for care settings rather than adapted from a generic course. It runs about 35 minutes and ends with a 20 question assessment.
- The Decontamination Cycle and Workflow
Every reusable surgical instrument follows a strict cycle from use through cleaning, disinfection, inspection, packaging, sterilisation and storage back to theatre.
- Cleaning and Disinfection Equipment
Instruments go through manual pre cleaning to remove visible contamination, then ultrasonic cleaning and washer disinfectors that use validated cycles with controlled temperature and time.
- Inspection, Packaging and Sterilisation
After cleaning, every instrument must be carefully inspected under good light and magnification to confirm it is genuinely clean, undamaged and functions correctly.
- Tracking, Traceability and Documentation
We record and scan every instrument set through each stage of the decontamination cycle and link it to the patient and operation where it will be used.
- Prion Disease Precautions and Single Use Devices
Prion diseases like Creutzfeldt Jakob disease are a grave concern because ordinary sterilisation does not reliably destroy prions.
- Recognising and Responding to Failures
You must recognise and act immediately on any failure in the decontamination process.
What your team will be able to do.
- Describe the complete decontamination cycle from contaminated instrument receipt through to sterile storage and dispatch
- Explain the dirty to clean workflow and why strict separation prevents recontamination
- Identify the validation and monitoring checks that prove sterilisation has been achieved
- Recognise when instruments cannot be released and what actions to take when failures occur
- Apply tracking and traceability requirements including special precautions for prion disease risk
Sterile Services and Instrument Decontamination in facts.
About 35 minutes, 6 lessons
20 questions, pass mark 80%
Every year
Yes, observed by the employer, checklist provided
What staff come away with
The decontamination cycle moves instruments from dirty through cleaning, disinfection, inspection, packaging, sterilisation to sterile storage with strict dirty to clean workflow preventing recontamination
Equipment like washer disinfectors and sterilisers must be loaded correctly, operated following validated cycles and tested daily to prove they are working
Every instrument must be inspected to confirm it is completely clean and undamaged before packaging and sterilisation
Tracking and traceability links each instrument set to patients and operations so we can trace back if a failure or infection risk is discovered
Single use devices marked with the crossed out 2 symbol must never be reprocessed, and prion disease risk requires special precautions
Failed cycles or contaminated instruments must never be released, must be quarantined and reported immediately regardless of urgency
Three steps, and nothing to set up.
Checkout takes a minute. Your licences and a receipt arrive by email straight away.
Enter their names and emails, or paste a list. They get an invite to the hub on any device.
You see who has finished, their score, and their certificate as each one comes in.
Everything a licence includes.
Dated, named, and downloadable as a PDF for your training file.
Over 60 languages, chosen per staff member. Your reporting stays in English.
Buy one module for one person if that is all you need. Nothing recurring.
Licences do not expire the moment you buy. Staff have a year to complete.
Before you buy.
How long does Sterile Services and Instrument Decontamination training take?
About 35 minutes, across 6 short lessons, followed by a 20 question assessment with a pass mark of 80%. Staff can stop and pick up where they left off.
What does the Sterile Services and Instrument Decontamination module cover?
6 lessons: The Decontamination Cycle and Workflow, Cleaning and Disinfection Equipment, Inspection, Packaging and Sterilisation, Tracking, Traceability and Documentation, Prion Disease Precautions and Single Use Devices and Recognising and Responding to Failures. Each one pairs the teaching with a care scenario and a quick check.
How often do staff need to refresh Sterile Services and Instrument Decontamination?
CareStream sets this module so it renews every year. Staff and managers are reminded before a certificate lapses, so the refresher is booked before the gap appears.
Does Sterile Services and Instrument Decontamination need a practical assessment?
Yes. The online module is the knowledge part. Staff also need an observed assessment in the workplace, carried out by their employer, and CareStream provides the observation checklist to record it.
Do I need a CareStream subscription to buy this?
No. This page exists precisely so you do not. You buy the licences you need, your staff complete the module in the CareStream hub, and that is the end of it. There is no trial to start, no card kept on file, and no subscription that begins quietly afterwards.
If you later decide you want the full platform, anything your staff have already completed carries across into your account.
What does one licence actually cover?
One licence covers one named member of staff for this one module, including the lesson, the assessment, any follow-up questions triggered by a wrong answer, and their certificate. Licences are not shared between people, because the completion record has to belong to an individual to be worth anything at inspection.
How quickly can staff start?
Immediately. The licences are on your account as soon as the payment clears, and staff get their invite the moment you add them. There is no onboarding call and no setup period.
Can staff complete it in another language?
Yes. Each staff member has a first language on their profile, and the lesson, the questions and the feedback all arrive in it. They answer in that language too. What you see as a manager stays in English, so the record reads the same whoever completed it.
What if someone fails the assessment?
Nothing is lost. A wrong answer triggers a short follow-up lesson on that specific point, and they retry it. The record shows the improvement from the first attempt to the latest, which is stronger evidence than a single pass mark, because it shows the gap was found and closed.
Can I buy for more than one service?
Yes. Buy the total number of licences you need and allocate them across your services when you add staff. If you are licensing for a group and want an invoice rather than a card payment, get in touch and we will raise one.
Licence any of these the same way.
Same price, same terms, no subscription needed.
